Ventilated façade
![0](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/0.jpg)
![1](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/1.jpg)
INFORMATIONS
about your request
TECHNICAL DATA
![data ventilated facade](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/data-ventilated-facade.png)
![module sizes](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/module-sizes-1.png)
INFORMATIONS ABOUT INSTALLATION
Mounting options:
The substructure and assembly must be carried out by the customer, whereby there are several possibilities for
mounting a façade glazing with photovoltaic modules. The following are a few examples:
1) Clamps
Assembly with clamps at the glass edges ↓
![8](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/8.jpg)
![6](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/6-1.jpg)
2) Point holders
Assembly with point holders in glass drillings ↓
![9](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/9.jpg)
![7](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/7-2.jpg)
3) Profiles
Assembly using profiles, which connect the glass panes ↓
![8](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/8.png)
![12](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/12.jpg)
4) Splice
Assembly with splice to the substructure ↓
![11](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/11.jpg)
![15.jpg](https://www.ertex-solar.at/wp-content/uploads/sites/4/2022/05/15.jpg.png)